YCplac22

Yeast centromeric plasmid with a TRP1 marker. See also YCplac33 and YCplac111.
|Download SnapGene Viewer
Explore Over 2.7k Plasmids: Yeast Plasmids | More Plasmid Sets
No matches
BspQI - SapI (4845) DrdI (4626) AlwNI (4319) AhdI (3840) BsaI (3774) BpmI (3771) AatII (2921) ZraI (2919) EcoO109I (2860) BbsI (2857) TRP1 promoter PmlI (2780) BstZ17I (2773) BstAPI (2664) MfeI (2596) Bsu36I (2495) EcoRV (2455) lac operator HindIII (233) SphI (243) PstI - SbfI (249) SalI (251) XbaI (257) BamHI (263) TspMI - XmaI (268) SmaI (270) Acc65I (272) KpnI (276) Eco53kI (280) SacI (282) EcoRI (284) KasI (445) NarI (446) SfoI (447) PluTI (449) SpeI (550) PflFI - Tth111I (942) DraIII (1428) BsaBI (1516) NgoMIV (1771) NaeI (1773) NheI (1801) BmtI (1805) BtgZI (1913) BglII (1986) PaqCI (2303) BsgI (2329) BstXI (2446) YCplac22 4854 bp
BspQI  (4845)
1 site
G C T C T T C N C G A G A A G N N N N

Sticky ends from different BspQI sites may not be compatible.
SapI  (4845)
1 site
G C T C T T C N C G A G A A G N N N N

Sticky ends from different SapI sites may not be compatible.
SapI gradually settles in solution, so a tube of SapI should be mixed before removing an aliquot.
DrdI  (4626)
1 site
G A C N N N N N N G T C C T G N N N N N N C A G

Sticky ends from different DrdI sites may not be compatible.
AlwNI  (4319)
1 site
C A G N N N C T G G T C N N N G A C

Sticky ends from different AlwNI sites may not be compatible.
AhdI  (3840)
1 site
G A C N N N N N G T C C T G N N N N N C A G

The 1-base overhangs produced by AhdI may be hard to ligate.
Sticky ends from different AhdI sites may not be compatible.
BsaI  (3774)
1 site
G G T C T C N C C A G A G N ( N ) 4

Sticky ends from different BsaI sites may not be compatible.
BsaI can be used between 37°C and 50°C.
BpmI  (3771)
1 site
C T G G A G ( N ) 14 N N G A C C T C ( N ) 14

Efficient cleavage requires at least two copies of the BpmI recognition sequence.
Sticky ends from different BpmI sites may not be compatible.
After cleavage, BpmI can remain bound to DNA and alter its electrophoretic mobility.
BpmI quickly loses activity at 37°C.
AatII  (2921)
1 site
G A C G T C C T G C A G
ZraI  (2919)
1 site
G A C G T C C T G C A G
EcoO109I  (2860)
1 site
R G G N C C Y Y C C N G G R

Sticky ends from different EcoO109I sites may not be compatible.
BbsI  (2857)
1 site
G A A G A C N N C T T C T G N N ( N ) 4

Sticky ends from different BbsI sites may not be compatible.
BbsI gradually loses activity when stored at -20°C.
PmlI  (2780)
1 site
C A C G T G G T G C A C
BstZ17I  (2773)
1 site
G T A T A C C A T A T G
BstAPI  (2664)
1 site
G C A N N N N N T G C C G T N N N N N A C G

Sticky ends from different BstAPI sites may not be compatible.
MfeI  (2596)
1 site
C A A T T G G T T A A C
Bsu36I  (2495)
1 site
C C T N A G G G G A N T C C

Sticky ends from different Bsu36I sites may not be compatible.
EcoRV  (2455)
1 site
G A T A T C C T A T A G

EcoRV is reportedly more prone than its isoschizomer Eco32I to delete a base after cleavage.
HindIII  (233)
1 site
A A G C T T T T C G A A
SphI  (243)
1 site
G C A T G C C G T A C G
PstI  (249)
1 site
C T G C A G G A C G T C
SbfI  (249)
1 site
C C T G C A G G G G A C G T C C
SalI  (251)
1 site
G T C G A C C A G C T G
XbaI  (257)
1 site
T C T A G A A G A T C T
BamHI  (263)
1 site
G G A T C C C C T A G G

After cleavage, BamHI-HF® (but not the original BamHI) can remain bound to DNA and alter its electrophoretic mobility.
TspMI  (268)
1 site
C C C G G G G G G C C C
XmaI  (268)
1 site
C C C G G G G G G C C C

Cleavage may be enhanced when more than one copy of the XmaI recognition sequence is present.
SmaI  (270)
1 site
C C C G G G G G G C C C

SmaI can be used at 37°C for brief incubations.
Acc65I  (272)
1 site
G G T A C C C C A T G G
KpnI  (276)
1 site
G G T A C C C C A T G G
Eco53kI  (280)
1 site
G A G C T C C T C G A G
SacI  (282)
1 site
G A G C T C C T C G A G
EcoRI  (284)
1 site
G A A T T C C T T A A G
KasI  (445)
1 site
G G C G C C C C G C G G
NarI  (446)
1 site
G G C G C C C C G C G G

Efficient cleavage requires at least two copies of the NarI recognition sequence.
SfoI  (447)
1 site
G G C G C C C C G C G G
PluTI  (449)
1 site
G G C G C C C C G C G G

Efficient cleavage requires at least two copies of the PluTI recognition sequence.
SpeI  (550)
1 site
A C T A G T T G A T C A
PflFI  (942)
1 site
G A C N N N G T C C T G N N N C A G

The 1-base overhangs produced by PflFI may be hard to ligate.
Sticky ends from different PflFI sites may not be compatible.
Tth111I  (942)
1 site
G A C N N N G T C C T G N N N C A G

The 1-base overhangs produced by Tth111I may be hard to ligate.
Sticky ends from different Tth111I sites may not be compatible.
DraIII  (1428)
1 site
C A C N N N G T G G T G N N N C A C

Sticky ends from different DraIII sites may not be compatible.
BsaBI  (1516)
1 site
G A T N N N N A T C C T A N N N N T A G
NgoMIV  (1771)
1 site
G C C G G C C G G C C G

Efficient cleavage requires at least two copies of the NgoMIV recognition sequence.
NaeI  (1773)
1 site
G C C G G C C G G C C G

Efficient cleavage requires at least two copies of the NaeI recognition sequence.
NheI  (1801)
1 site
G C T A G C C G A T C G
BmtI  (1805)
1 site
G C T A G C C G A T C G
BtgZI  (1913)
1 site
G C G A T G ( N ) 10 C G C T A C ( N ) 10 ( N ) 4

Sticky ends from different BtgZI sites may not be compatible.
After cleavage, BtgZI can remain bound to DNA and alter its electrophoretic mobility.
BtgZI is typically used at 60°C, but is 75% active at 37°C.
BglII  (1986)
1 site
A G A T C T T C T A G A
PaqCI  (2303)
1 site
C A C C T G C ( N ) 4 G T G G A C G ( N ) 4 ( N ) 4

Efficient cleavage requires at least two copies of the PaqCI recognition sequence.
Sticky ends from different PaqCI sites may not be compatible.
Cleavage can be improved with PaqCI Activator.
BsgI  (2329)
1 site
G T G C A G ( N ) 14 N N C A C G T C ( N ) 14

Efficient cleavage requires at least two copies of the BsgI recognition sequence.
Sticky ends from different BsgI sites may not be compatible.
For full activity, add fresh S-adenosylmethionine (SAM).
BstXI  (2446)
1 site
C C A N N N N N N T G G G G T N N N N N N A C C

Sticky ends from different BstXI sites may not be compatible.
CEN/ARS
1064 .. 2227  =  1164 bp
S. cerevisiae CEN4 centromere fused to the autonomously replicating sequence ARS1/ARS416
CEN/ARS
1064 .. 2227  =  1164 bp
S. cerevisiae CEN4 centromere fused to the autonomously replicating sequence ARS1/ARS416
AmpR
3053 .. 3913  =  861 bp
286 amino acids  =  31.6 kDa
2 segments
   Segment 1:  signal sequence  
   3053 .. 3121  =  69 bp
   23 amino acids  =  2.6 kDa
Product: β-lactamase
confers resistance to ampicillin, carbenicillin, and related antibiotics
AmpR
3053 .. 3913  =  861 bp
286 amino acids  =  31.6 kDa
2 segments
   Segment 2:  
   3122 .. 3913  =  792 bp
   263 amino acids  =  28.9 kDa
Product: β-lactamase
confers resistance to ampicillin, carbenicillin, and related antibiotics
AmpR
3053 .. 3913  =  861 bp
286 amino acids  =  31.6 kDa
2 segments
Product: β-lactamase
confers resistance to ampicillin, carbenicillin, and related antibiotics
ori
4084 .. 4672  =  589 bp
high-copy-number colE1/pMB1/pBR322/pUC origin of replication
ori
4084 .. 4672  =  589 bp
high-copy-number colE1/pMB1/pBR322/pUC origin of replication
lacZα
216 .. 554  =  339 bp
112 amino acids  =  13.1 kDa
Product: LacZα fragment of β-galactosidase
lacZα
216 .. 554  =  339 bp
112 amino acids  =  13.1 kDa
Product: LacZα fragment of β-galactosidase
AmpR promoter
2948 .. 3052  =  105 bp
AmpR promoter
2948 .. 3052  =  105 bp
TRP1 promoter
2741 .. 2842  =  102 bp
TRP1 promoter
2741 .. 2842  =  102 bp
lac promoter
142 .. 172  =  31 bp
3 segments
   Segment 1:  -35  
   142 .. 147  =  6 bp
promoter for the E. coli lac operon
lac promoter
142 .. 172  =  31 bp
3 segments
   Segment 2:  
   148 .. 165  =  18 bp
promoter for the E. coli lac operon
lac promoter
142 .. 172  =  31 bp
3 segments
   Segment 3:  -10  
   166 .. 172  =  7 bp
promoter for the E. coli lac operon
lac promoter
142 .. 172  =  31 bp
3 segments
promoter for the E. coli lac operon
lac operator
180 .. 196  =  17 bp
The lac repressor binds to the lac operator to inhibit transcription in E. coli. This inhibition can be relieved by adding lactose or isopropyl-β-D-thiogalactopyranoside (IPTG).
lac operator
180 .. 196  =  17 bp
The lac repressor binds to the lac operator to inhibit transcription in E. coli. This inhibition can be relieved by adding lactose or isopropyl-β-D-thiogalactopyranoside (IPTG).
TRP1
2066 .. 2740  =  675 bp
224 amino acids  =  24.1 kDa
Product: phosphoribosylanthranilate isomerase, required for tryptophan biosynthesis
yeast auxotrophic marker
TRP1
2066 .. 2740  =  675 bp
224 amino acids  =  24.1 kDa
Product: phosphoribosylanthranilate isomerase, required for tryptophan biosynthesis
yeast auxotrophic marker
MCS
233 .. 289  =  57 bp
pUC19 multiple cloning site
MCS
233 .. 289  =  57 bp
pUC19 multiple cloning site
M13 rev
204 .. 220  =  17 bp
common sequencing primer, one of multiple similar variants
M13 rev
204 .. 220  =  17 bp
common sequencing primer, one of multiple similar variants
M13 fwd
290 .. 306  =  17 bp
common sequencing primer, one of multiple similar variants
M13 fwd
290 .. 306  =  17 bp
common sequencing primer, one of multiple similar variants
ORF:  3053 .. 3913  =  861 bp
ORF:  286 amino acids  =  31.6 kDa
ORF:  216 .. 554  =  339 bp
ORF:  112 amino acids  =  13.1 kDa
ORF:  1980 .. 2330  =  351 bp
ORF:  116 amino acids  =  12.8 kDa
ORF:  2209 .. 2490  =  282 bp
ORF:  93 amino acids  =  10.8 kDa
ORF:  3517 .. 3783  =  267 bp
ORF:  88 amino acids  =  9.2 kDa
ORF:  143 .. 520  =  378 bp
ORF:  125 amino acids  =  14.4 kDa
ORF:  2066 .. 2740  =  675 bp
ORF:  224 amino acids  =  24.1 kDa
Click here to try SnapGene

Download YCplac22.dna file

SnapGene

SnapGene is the easiest way to plan, visualize and document your everyday molecular biology procedures

  • Fast accurate construct design for all major molecular cloning techniques
  • Validate sequenced constructs using powerful alignment tools
  • Customize plasmid maps with flexible annotation and visualization controls
  • Automatically generate a rich graphical history of every edit and procedure

SnapGene Viewer

SnapGene Viewer is free software that allows molecular biologists to create, browse, and share richly annotated sequence files.

  • Gain unparalleled visibility of your plasmids, DNA and protein sequences
  • Annotate features on your plasmids using the curated feature database
  • Store, search, and share your sequences, files and maps

Individual Sequences & Maps

The maps, notes, and annotations in the zip file on this page are copyrighted material. This material may be used without restriction by academic, nonprofit, and governmental entities, except that the source must be cited as ’’www.snapgene.com/resources’’. Commercial entities must contact GSL Biotech LLC for permission and terms of use.

Discover the most user-friendly molecular biology experience.